Hi, I'm Kelly!
Subscribe

Search
Categories
« summer scents | Main | grand banks nyc »
Wednesday
Jul012015

how to make a monkey's fist (nautical rope door stop)

One of the first DIY's I ever posted here on the blog was a Monkey's fist, better known as a nautical rope door stop.  I've made so many of them over the years for friends and clients and I even gave some away as favors at my baby shower!  Not only are they super simple to make, but they're one of those little projects that gives you so much satisfaction at being able to do yourself.  In the spirit of the beachy, nautical vibe of my posts lately, I thought it was worth posting again!  It's the perfect nautical touch for bookshelves or coffee tables and is a great "just because" gift idea. 

For this one, I used 1/2 inch manila rope that I bought at Lowe's for less than 50 cents per foot.  You'll need 12 feet.  Begin by making four vertical turns around your hand:

Then, hold your vertical turns with four horizontal turns, like so:

Next, make another four vertical turns around the four horizontal ones you just made, this time from inside and underneath the vertical turns (you'll bring your rope up from the bottom of the knot, up around to the top):

  It may take a little tweaking and tightening of individual pieces of the rope, but it will look like this once you're done:

The extra rope that is left at the end can be tucked in to the knot.  To make the "handle" of the knot, take the remaining rope and tuck it in, creating a loop:

The best part is that you can take it apart easily and re-do until you get the hang of it; for me, the hardest part was getting each piece tight enough, but after a few tries you get the hang of it.  Easy peasy!

PrintView Printer Friendly Version

EmailEmail Article to Friend

Reader Comments (2)

DO you start at the end of the rope or in the middle? If you start at the end, how much do you leave hanging off the end before making the turns around your hand? Make sense???

June 15, 2016 | Unregistered CommenterBeth S.

Beth- I start at the end and leave about 10 inches out so that you can tuck it in at the very end for a handle!

June 15, 2016 | Registered CommenterKelly Stivers

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
Post:
 
Some HTML allowed: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <code> <em> <i> <strike> <strong>